Commonwealth Bank of Australia CEO apologies for financial planning scandal

">
Commonwealth Bank of Australia CEO apologies for financial planning scandal
No Comments »

Thursday, July 3, 2014

Ian Narev, the CEO of the Commonwealth Bank of Australia, this morning “unreservedly” apologised to clients who lost money in a scandal involving the bank’s financial planning services arm.

Last week, a Senate enquiry found financial advisers from the Commonwealth Bank had made high-risk investments of clients’ money without the clients’ permission, resulting in hundreds of millions of dollars lost. The Senate enquiry called for a Royal Commission into the bank, and the Australian Securities and Investments Commission (ASIC).

Mr Narev stated the bank’s performance in providing financial advice was “unacceptable”, and the bank was launching a scheme to compensate clients who lost money due to the planners’ actions.

In a statement Mr Narev said, “Poor advice provided by some of our advisers between 2003 and 2012 caused financial loss and distress and I am truly sorry for that. […] There have been changes in management, structure and culture. We have also invested in new systems, implemented new processes, enhanced adviser supervision and improved training.”

An investigation by Fairfax Media instigated the Senate inquiry into the Commonwealth Bank’s financial planning division and ASIC.

Whistleblower Jeff Morris, who reported the misconduct of the bank to ASIC six years ago, said in an article for The Sydney Morning Herald that neither the bank nor ASIC should be in control of the compensation program.

Retrieved from “https://en.wikinews.org/w/index.php?title=Commonwealth_Bank_of_Australia_CEO_apologies_for_financial_planning_scandal&oldid=3869292”
Uncategorized June 25th 2021

3 Easy Steps To Get Into Weight Loss Mode And Burn More Fat

No Comments »

By Tony Leong

Do you know there are three easy steps that you can implement today that can get you into weight loss mode? If you are looking for some technique to get your fat burning furnace roaring, you are in luck because I am going to share with you 3 steps that you can take so your body can burn more body fat.

There are tips and tricks that we can implement so that we can get more from our workout. This means burn more fat and save more time. All of us are looking for methods to lose weight quickly and get the most of our time. So, by implementing these 3 tips, you can definitely burn more body fat and see the results quite quickly. Without wasting more time, lets dive into it.

Step 1

Do your cardio after your intense weight training. This is by far one of the best method I have seen working for my clients. For those who do not know me, I have been doing personal training for more than 7000 hours since the 2004 and I find that my clients that follow my instructions and do their cardio after their weight training lose the most fat!

[youtube]http://www.youtube.com/watch?v=YTJNQ4FPF0w[/youtube]

The reason behind this is because we are glucose depleted after an intense weight training session. Hence when you hit the cardio, your body will start using body fat straight away. If you do cardio before you weight training, you will waste time spending 10 to 15 minutes burning the sugar in your body and then only the body fat. Then when you do weight training, you will not have the power and strength to complete an intense weight training session.

During weight training, you only use sugar. So, it is more effective to do weight training first, burn of the sugar and then hit the cardio machine for maximum fat loss. If you are not use to do your cardio after weight training, you will feel that your body is heavy and find it really tough. Do it slowly. Do your cardio workout at the intensity of 70 % of your max heart rate the after 5 to 7 minutes; you feel that you can go on forever!

Step 2

Now this is a bit of a controversial issue. Some pros do not like this method and some do. I personally experienced great results from it. It is called low card dieting. Yeah, you have heard of it like a thousand times. I am not a dietitian, but for my modeling days, I use to go low carb for 5 days and then eat normal on Saturday and Sunday.

This is not Atkins diet. I do not eat lots of fats. I eat lots of vegetables; eat lots of fish, egg whites and chicken. I also drink lots of soup because I found out that soup could really satisfy my appetite. The bulk of the meals come from vegetables because it is healthy and keeps your stomach full. You will feel a bit tired during your weight training but that is normal. You are not there to do the World’s Strongest Man event.

The key to maintain on this diet is that you have to eat 5 to 6 meals a day. Always plan ahead. I cannot emphasize enough. You need to plan what time you eat and what you will eat. This will help you cope up with all the hunger pangs. If you fail to plan you plan to fail.

Step 3

This tips is actually very easy. It won’t need you to put in more time into you workout or change your lifestyle. If you have been doing cardio religiously 3 to 5 times a week, why not supercharge your fat loss by using a heart rate monitor. By using a heart rate monitor, you can laser target you fat burning zone. With the heart rate monitor you would also know whether you are really tired or pure lazy. I workout too, I know. Sometimes I feel like I just don’t have the stamina but when I checked my heart rate, it is just fine and sometimes below the required zone. So, I know I am just cheating myself if I stop. I discuss in more detail about getting the right heart rate in my Fast Fat Loss E-Mag. I high recommend you to subscribe to it to learn more and it is free.

There you have it. Three tips for you to get into weight loss mode that you can implement today. The biggest killer I think is procrastinating. Get started today and look great faster. Keep on learning and join info sites like Fast Fat Loss E-Mag to avoid making weight loss mistakes.

About the Author: Tony Leong is an experienced ACE personal trainer that had helped many people achieve their fitness goals. For a limited time only, you can download his weight loss system called

Tony Leong’s Weight Loss System

for absolutely free.

Source:

isnare.com

Permanent Link:

isnare.com/?aid=264495&ca=Wellness%2C+Fitness+and+Diet

Joint Treatment June 23rd 2021

Wikinews interviews Jim Hedges, U.S. Prohibition Party presidential candidate

">
Wikinews interviews Jim Hedges, U.S. Prohibition Party presidential candidate
No Comments »

Saturday, January 29, 2011

U.S. Prohibition Party presidential candidate Jim Hedges of Thompson Township, Pennsylvania took some time to answer a few questions about the Prohibition Party and his 2012 presidential campaign.

The Prohibition Party is the third oldest existing political party in the United States, having been established in 1869. It reached its height of popularity during the late 19th century. The party heavily supported the Eighteenth Amendment to the United States Constitution, which banned the sale of alcohol, and resulted in the US period known as Prohibition (1919–33). It was repealed in 1933. The party has declined since this period, but has continued to nominate candidates for the presidential election.

In 2003, the party split into two factions. Preacher Gene Amondson and perennial candidate Earl Dodge were nominated for the presidency by their respective factions. After Dodge’s death in 2007, the party reunified and named Amondson as its sole presidential nominee for 2008. During the election, Amondson was interviewed by Wikinews. He died in 2009, leaving an opening in the party for 2012.

Jim Hedges is a longtime Prohibition activist, who holds the distinction of the first individual of the 21st century (and the first since 1959) to be elected to a political office under the Prohibition Party banner. In 2001, he was elected as the Thompson Township tax assessor, and was re-elected to the post in 2005. He served until his term expired in 2010. Hedges declared his intent to run for the Prohibition Party presidential nomination on February 18, 2010. This marks his first run for the presidency.

Retrieved from “https://en.wikinews.org/w/index.php?title=Wikinews_interviews_Jim_Hedges,_U.S._Prohibition_Party_presidential_candidate&oldid=4261311”
Uncategorized June 23rd 2021

Israel Journal: Is Yossi Vardi a good father to his entrepreneurial children?

">
Israel Journal: Is Yossi Vardi a good father to his entrepreneurial children?
No Comments »

Thursday, December 20, 2007

Wikinews reporter David Shankbone is currently, courtesy of the Israeli government and friends, visiting Israel. This is a first-hand account of his experiences and may — as a result — not fully comply with Wikinews’ neutrality policy. Please note this is a journalism experiment for Wikinews and put constructive criticism on the collaboration page.

This article mentions the Wikimedia Foundation, one of its projects, or people related to it. Wikinews is a project of the Wikimedia Foundation.

Dr. Yossi Vardi is known as Israel’s ‘Father of the Entrepreneur’, and he has many children in the form of technology companies he has helped to incubate in Tel Aviv‘s booming Internet sector. At the offices of Superna, one such company, he introduced a whirlwind of presentations from his baby incubators to a group of journalists. What stuck most in my head was when Vardi said, “What is important is not the technology, but the talent.” Perhaps because he repeated this after each young Internet entrepreneur showed us his or her latest creation under Vardi’s tutelage. I had a sense of déjà vu from this mantra. A casual reader of the newspapers during the Dot.com boom will remember a glut of stories that could be called “The Rise of the Failure”; people whose technology companies had collapsed were suddenly hot commodities to start up new companies. This seemingly paradoxical thinking was talked about as new back then; but even Thomas Edison—the Father of Invention—is oft-quoted for saying, “I have not failed. I have just found ten thousand ways that won’t work.”

Vardi’s focus on encouraging his brood of talent regardless of the practicalities stuck out to me because of a recent pair of “dueling studies” The New York Times has printed. These are the sort of studies that confuse parents on how to raise their kids. The first, by Carol Dweck at Stanford University, came to the conclusion that children who are not praised for their efforts, regardless of the outcome’s success, rarely attempt more challenging and complex pursuits. According to Dweck’s study, when a child knows that they will receive praise for being right instead of for tackling difficult problems, even if they fail, they will simply elect to take on easy tasks in which they are assured of finding the solution.

Only one month earlier the Times produced another story for parents to agonize over, this time based on a study from the Brookings Institution, entitled “Are Kids Getting Too Much Praise?” Unlike Dweck’s clinical study, Brookings drew conclusions from statistical data that could be influenced by a variety of factors (since there was no clinical control). The study found American kids are far more confident that they have done well than their Korean counterparts, even when the inverse is true. The Times adds in the words of a Harvard faculty psychologist who intoned, “Self-esteem is based on real accomplishments. It’s all about letting kids shine in a realistic way.” But this is not the first time the self-esteem generation’s proponents have been criticized.

Vardi clearly would find himself encouraged by Dweck’s study, though, based upon how often he seemed to ask us to keep our eyes on the people more than the products. That’s not to say he has not found his latest ICQ, though only time—and consumers—will tell.

For a Web 2.User like myself, I was most fascinated by Fixya, a site that, like Wikipedia, exists on the free work of people with knowledge. Fixya is a tech support site where people who are having problems with equipment ask a question and it is answered by registered “experts.” These experts are the equivalent of Wikipedia’s editors: they are self-ordained purveyors of solutions. But instead of solving a mystery of knowledge a reader has in their head, these experts solve a problem related to something you have bought and do not understand. From baby cribs to cellular phones, over 500,000 products are “supported” on Fixya’s website. The Fixya business model relies upon the good will of its experts to want to help other people through the ever-expanding world of consumer appliances. But it is different from Wikipedia in two important ways. First, Fixya is for-profit. The altruistic exchange of information is somewhat dampened by the knowledge that somebody, somewhere, is profiting from whatever you give. Second, with Wikipedia it is very easy for a person to type in a few sentences about a subject on an article about the Toshiba Satellite laptop, but to answer technical problems a person is experiencing seems like a different realm. But is it? “It’s a beautiful thing. People really want to help other people,” said the presenter, who marveled at the community that has already developed on Fixya. “Another difference from Wikipedia is that we have a premium content version of the site.” Their premium site is where they envision making their money. Customers with a problem will assign a dollar amount based upon how badly they need an answer to a question, and the expert-editors of Fixya will share in the payment for the resolved issue. Like Wikipedia, reputation is paramount to Fixya’s experts. Whereas Wikipedia editors are judged by how they are perceived in the Wiki community, the amount of barnstars they receive and by the value of their contributions, Fixya’s customers rate its experts based upon the usefulness of their advice. The site is currently working on offering extended warranties with some manufacturers, although it was not clear how that would work on a site that functioned on the work of any expert.

Another collaborative effort product presented to us was YouFig, which is software designed to allow a group of people to collaborate on work product. This is not a new idea, although may web-based products have generally fallen flat. The idea is that people who are working on a multi-media project can combine efforts to create a final product. They envision their initial market to be academia, but one could see the product stretching to fields such as law, where large litigation projects with high-level of collaboration on both document creation and media presentation; in business, where software aimed at product development has generally not lived up to its promises; and in the science and engineering fields, where multi-media collaboration is quickly becoming not only the norm, but a necessity.

For the popular consumer market, Superna, whose offices hosted our meeting, demonstrated their cost-saving vision for the Smart Home (SH). Current SH systems require a large, expensive server in order to coordinate all the electronic appliances in today’s air-conditioned, lit and entertainment-saturated house. Such coordinating servers can cost upwards of US$5,000, whereas Superna’s software can turn a US$1,000 hand-held tablet PC into household remote control.

There were a few start-ups where Vardi’s fatherly mentoring seemed more at play than long-term practical business modeling. In the hot market of WiFi products, WeFi is software that will allow groups of users, such as friends, share knowledge about the location of free Internet WiFi access, and also provide codes and keys for certain hot spots, with access provided only to the trusted users within a group. The mock-up that was shown to us had a Google Maps-esque city block that had green points to the known hot spots that are available either for free (such as those owned by good Samaritans who do not secure their WiFi access) or for pay, with access information provided for that location. I saw two long-term problems: first, WiMAX, which is able to provide Internet access to people for miles within its range. There is already discussion all over the Internet as to whether this technology will eventually make WiFi obsolete, negating the need to find “hot spots” for a group of friends. Taiwan is already testing an island-wide WiMAX project. The second problem is if good Samaritans are more easily located, instead of just happened-upon, how many will keep their WiFi access free? It has already become more difficult to find people willing to contribute to free Internet. Even in Tel Aviv, and elsewhere, I have come across several secure wireless users who named their network “Fuck Off” in an in-your-face message to freeloaders.

Another child of Vardi’s that the Brookings Institution might say was over-praised for self-esteem but lacking real accomplishment is AtlasCT, although reportedly Nokia offered to pay US$8.1 million for the software, which they turned down. It is again a map-based software that allows user-generated photographs to be uploaded to personalized street maps that they can share with friends, students, colleagues or whomever else wants to view a person’s slideshow from their vacation to Paris (“Dude, go to the icon over Boulevard Montmartre and you’ll see this girl I thought was hot outside the Hard Rock Cafe!”) Aside from the idea that many people probably have little interest in looking at the photo journey of someone they know (“You can see how I traced the steps of Jesus in the Galilee“), it is also easy to imagine Google coming out with its own freeware that would instantly trump this program. Although one can see an e-classroom in architecture employing such software to allow students to take a walking tour through Rome, its desirability may be limited.

Whether Vardi is a smart parent for his encouragement, or in fact propping up laggards, is something only time will tell him as he attempts to bring these products of his children to market. The look of awe that came across each company’s representative whenever he entered the room provided the answer to the question of Who’s your daddy?

Retrieved from “https://en.wikinews.org/w/index.php?title=Israel_Journal:_Is_Yossi_Vardi_a_good_father_to_his_entrepreneurial_children%3F&oldid=1979332”
Uncategorized June 22nd 2021

Allegations President Bush staged photo-ops in aftermath of Hurricane Katrina tragedy

">
Allegations President Bush staged photo-ops in aftermath of Hurricane Katrina tragedy
No Comments »

Tuesday, September 6, 2005

In a press release issued Saturday, September 3rd, 2005, Democratic Senator Mary L. Landrieu of Louisiana claims that President Bush staged a photo opportunity, at the breached 17th Street levee, by having equipment quickly moved into the background during the event. Senator Landrieu says the equipment was dispersed elsewhere the next day, but did not provide details.

Landrieu says in her press release, ” … we witnessed a hastily prepared stage set for a Presidential photo opportunity; and the desperately needed resources we saw were this morning reduced to a single, lonely piece of equipment. The good and decent people of southeast Louisiana and the Gulf Coast — black and white, rich and poor, young and old — deserve far better from their national government …”

The President and Senator Landrieu toured the 17th Street levee on Friday, and held the photo-op. Senator Landrieu said she believed the repair effort was legitimate, at that time. Less than 24 hours later, she discovered only “one lonely crane” working on the site, while giving an aerial tour for ABC’s This Week with George Stephanopoulos. A video of her tearful comments, during that tour, has been circulating around the internet (WMV).

Senator Landrieu made no specific accusations about the photo-op during the ABC tour. However, neither does her press release describe any measures taken to verify that equipment was in-fact pulled from other projects for the purpose of the photo-op, nor where the equipment is now. The canal wall breach, near Hammond Highway, was later shown Sunday on CBS’ 60 Minutes with dump trucks and a power shovel building a single-lane pathway across the gap. The breach was closed Monday.

Senator Landrieu was herself criticized by Anderson Cooper (CNN) on Thursday, after she responded to a question by rattling off a list of “thank yous” to other politicians (WMV, transcript). Democratic pundits have excused such detachment as an attempt to gain more federal assistance during the tragedy. Senator Landrieu’s press release partially confirms this interpretation by attempting to simultaneously ask the president for more aid, while accusing him of misusing existing resources.

Although press reports mentioned the 17th Street Canal breach was blocked by the use of metal sheets, sandbags, and dumped fill, details were not available. On Wednesday September 7 it was reported that earlier metal girders, often used for retaining walls, had been hung down from the north side of the Hammond Highway bridge so as to form a metal wall which blocked the canal from the lake. After the breach had been closed, by sandbags and fill delivered by dump truck, the metal wall was opened to allow draining of the city through the canal.

Obviously placing the metal wall required an assortment of equipment which was no longer needed after it was in place. The wall was only visible from the bridge and most dry land as a few feet of metal along the bridge railing. It is not known if Senator Landrieu noticed this work of engineering, nor if she had been briefed as to what was being done.

However, photos of work at the site were later found which showed a lot of activity Sept 4, after Landrieu said the equipment was not there. However, the sheet piling wall in the photo was reported to have been completed September 2. Information of the schedule of similar work at the London Avenue breach has not been found.

Retrieved from “https://en.wikinews.org/w/index.php?title=Allegations_President_Bush_staged_photo-ops_in_aftermath_of_Hurricane_Katrina_tragedy&oldid=2086156”
Uncategorized June 22nd 2021

Custom Printed Poly Bags In The Food Industry

No Comments »

Submitted by: Brooks Hogg

When a consumer shops for packaged food, which is that one thing that grabs his or her attention? Of course, the packaging! Especially in case of frozen foods, packaging plays a vital role. Consumers shy away from food stuff that is not packed well or lacks sufficient product information, right to the innermost packing layer.

The innermost polybag layer that comes in contact with food must be of material that is approved by the United States Department of Agriculture (USDA) and the U.S. Food and Drug Administration (FDA) for food safety. The food industry makes ample use of custom printed poly bags to make sure that the end users can see the relevant product information such as ingredients, cooking instructions, storage instructions and product expiry dates.

The use of these poly bags is not just limited to the innermost packaging in the food manufacturing and processing domain. These days more and more businesses are using custom printed poly bags as a part of a promotional strategy to create awareness about their products and services.

[youtube]http://www.youtube.com/watch?v=NEGxEEDNUys[/youtube]

Why custom-printed poly bags are popula

Easy to use branding material- Printed poly bags make wonderful branding material. By getting their name, company logo and contact details printed on poly bags, food service providers convert a simple brand into an effective brand ambassador ! Many service providers encourage consumers to reuse these poly bags multiple times; this ensures the maximum relay of the brand message to a wider customer base.

Effective way to promote the green initiative – Responsible business owners display messages on printed poly bags for their re-use and appropriate disposal. Since most plastic bags can be recycled, many brands take the initiative of educating the customers to do their bit to help the environment, even as they use these bags. Moreover, these days custom made poly bags are made by some reputed manufacturers using 100% renewable energy.

Highly customizable -These days, poly bag suppliers make various kinds of plastic bags as per specific industry needs. All poly bags that come in food contact are certified by the USDA and FDA for food safety and to conform to the set guidelines. Also, businesses can order these bags in specific sizes and with special features such as die-cut handles, zip closures, or flap closures. One can order bags of varying thickness as well (0.8 Mil – 8 Mil), depending on the intended use.

Where to buy custom printed plastic bags from?

For business owners in the food industry, using high-quality poly bags is a must; more so when the bags will be used to pack food directly. Most reputed suppliers of plastic bags use polyethylene of approved quality to make the bags. Before making a purchase, business owners must check the food-grade certification of the manufacturer.

One can either turn to the yellow pages to follow a complicated procedure to buy customized poly bags; or simply turn to the internet. One can easily buy custom made poly bags online, and even get them delivered by the manufacturer through standard shipping. Buying online can save business owners a lot of time, and get the required bags at very affordable prices.

About the Author: Brooks Hogg is a packaging expert. He loves to share information on poly bags. Read his blogs to know more about plastic poly bags, plastic garment bags, minigrip zip lock bags, custom printed plastic bags and so on.

polybagsforless.com

Source:

isnare.com

Permanent Link:

isnare.com/?aid=1901786&ca=Business

Kitchen Home Improvement June 22nd 2021

Third explosion at Fukushima Daiichi nuclear power plant

">
Third explosion at Fukushima Daiichi nuclear power plant
No Comments »

Monday, March 14, 2011

An explosion was reported at 0610 local time Tuesday morning at the Fukushima Daiichi nuclear power plant’s second reactor. The blast is feared to have breached the pressure chamber.

The explosion is thought to have been in the reactor’s “pressure suppression room” — part of the cooling system. It damaged the area that contains water to cool the reactor, but it is not yet clear whether it affected the containment structure near the core.

Government officials have said that there was limited damage as a result of the explosion, and efforts to cool the reactor would go on, but nuclear industry executives in Japan have said that the situation is far worse, and other unnamed officials said the containment structure had been damaged, but did not say to what extent. In the wake of the explosion, officials at the Tokyo Electric Power Company (TEPCO), the plant’s operator, said for the first time a partial meltdown could be taking place within the reactor.

After the explosion, radiation levels near the facility rose from 1,941 to 8,712 microsieverts, a level still short of that required to cause immediate health effects, and radiation decreased again some time after the explosion. The legal limit for radiation in one year is a thousand microseiverts, but radiation sickness does not occur until a million microseiverts.

Prior to the explosion the fuel rods in the reactor reported to again be exposed after the pressure valve closed at 11pm local time, preventing pumping in cooling water.

“The reactor containment vessel, which is the last line of defence to contain the radiation, this may have experienced some damage…it seems that there are damages at several different places of these walls around radioactive substances.” [excerpted from live translation transcription by CNN of NHK coverage of press conference, stream]

According to TEPCO, all but 50 employees of the plant were evacuated after the incident.

Workers at the 40-year old plant have been struggling to deal with the aftermath of Friday’s massive earthquake and tsunami. On Saturday, a hydrogen explosion occurred at the number one reactor, followed by a second explosion on Sunday to the number three reactor. The number two reactor was reported to be overheating, with exposed fuel rods, earlier today. Nearly 185,000 people have been evacuated from the 20 km zone around the plant.

Retrieved from “https://en.wikinews.org/w/index.php?title=Third_explosion_at_Fukushima_Daiichi_nuclear_power_plant&oldid=3449933”
Uncategorized June 22nd 2021

OpenSync Interview – syncing on the free desktop

">
OpenSync Interview – syncing on the free desktop
No Comments »

Friday, May 19, 2006

This interview intends to provide some insight into OpenSync, an upcoming free unified data synchronization solution for free software desktops such as KDE, commonly used as part of the GNU/Linux operating system.

Hi Cornelius, Armin and Tobias. As you are now getting close to version 1.0 of OpenSync, which is expected to become the new synchronisation framework for KDE and other free desktops, we are quite interested in the merits it can provide for KDE users and for developers, as well as for the Open Source Community as a whole. So there’s one key-question before I move deeper into the details of OpenSync:

What does OpenSync accomplish, that no one did before?

Cornelius:

First of all it does its job of synchronizing data like addressbooks and calendars between desktop applications and mobile devices like PDAs and cell phones.
But the new thing about OpenSync is that it isn’t tied to a particular device or a specific platform. It provides an extensible and modular framework that is easy to adopt for application developers and people implementing support for syncing with mobile devices.
OpenSync is also independent of the desktop platform. It will be the common syncing backend for at least KDE and GNOME and other projects are likely to join. That means that the free desktop will have one common syncing solution. This is something really new.

How do the end-users profit from using synching solutions that interface with OpenSync as framework?

Cornelius:

First, the users will be able to actually synchronize all their data. By using one common framework there won’t be any “missing links”, where one application can sync one set of devices and another application a different one. With OpenSync all applications can sync all devices.
Second, the users will get a consistent and common user interface for syncing across all applications and devices. This will be much simpler to use than the current incoherent collection of syncing programs you need if you have more than the very basic needs.

How does OpenSync help developers with coding?

Cornelius:

It’s a very flexible and well-designed framework that makes it quite easy for developers to add support for new devices and new types of data. It’s also very easy to add support for OpenSync to applications.
The big achievement of OpenSync is that it hides all the gory details of syncing from the developers who work on applications and device support. That makes it possible for the developers to concentrate on their area of expertise without having to care what’s going on behind the scenes.
I have written quite a lot of synchronization code in the past. Trust me, it’s much better, if someone just takes care of it for you, and that’s what OpenSync does.

Tobias:

Another point to mention is the python wrapper for opensync, so you are not bound to C or C++, but can develop plugins in a high level scripting language.

Why should producers of portable devices get involved with your team?

Cornelius:

OpenSync will be the one common syncing solution for the free desktop. That means there is a single point of contact for device manufacturers who want to add support for their devices. That’s much more feasible than addressing all the different applications and solutions we had before. With OpenSync it hopefully will become interesting for manufacturers to officially support Linux for their devices.

Do you also plan to support applications of OpenSync in proprietary systems like OSX and Windows?

Cornelius:

OpenSync is designed to be cross-platform, so it is able to run on other systems like Windows. How well this works is always a question of people actually using and developing for this system. As far as I know there isn’t a real Windows community around OpenSync yet. But the technical foundation is there, so if there is somebody interested in working on a unified syncing solution on Windows, everybody is welcome to join the project.

What does your synchronisation framework do for KDE and for KitchenSync in particular?

Cornelius:

OpenSync replaces the KDE-specific synchronization frameworks we had before. Even in KDE we had several separate syncing implementations and with OpenSync we can get replace them with a common framework. We had a more generic syncing solution in KDE under development. This was quite similar from a design point of view to OpenSync, but it never got to the level of maturity we would have needed, because of lack of resources. As OpenSync fills this gap we are happy to be able to remove our old code and now concentrate on our core business.

What was your personal reason for getting involved with OpenSync?

Cornelius:

I wrote a lot of synchronization code in the past, which mainly came from the time where I was maintaining KOrganizer and working on KAddressBook. But this always was driven by necessity and not passion. I wanted to have all my calendar and contact data in one place, but my main objective was to work on the applications and user interfaces handling the data and not on the underlying code synchronizing the data.
So when the OpenSync project was created I was very interested. At GUADEC in Stuttgart I met with Armin, the maintainer of OpenSync, and we talked about integrating OpenSync with KDE. Everything seemed to fit together quite well, so at Linuxtag the same year we had another meeting with some more KDE people. In the end we agreed to go with OpenSync and a couple of weeks later we met again in Nuernberg for three days of hacking and created the KDE frontend for OpenSync. In retrospect it was a very pleasant and straightforward process to get where we are now.

Armin:

My reason to get involved (or better to start) OpenSync was my involvement with its predecessor Multisync. I am working as a system administrator for a small consulting company and so I saw some problems when trying to find a synchronization solution for Linux.
At that point I joined the Multisync project to implement some plugins that I thought would be nice to have. After some time I became the maintainer of the project. But I was unhappy with some technical aspects of the project, especially the tight coupling between the syncing logic and the GUI, its dependencies on GNOME libraries and its lack of flexibility.

Tobias:

Well, I have been a KDE PIM developer for several years now, so there was no way around getting in touch with synchronization and KitchenSync. Although I liked the idea of KitchenSync, I hated the code and the user interface […]. So when we discussed to switch to OpenSync and reimplementing the user interface, I volunteered immediately.

Can you tell us a bit about your further plans and ideas?

Cornelius:

The next thing will be the 1.0 release of OpenSync. We will release KitchenSync as frontend in parallel.

Armin:

There are of course a lot of things on my todo and my wishlist for opensync. For the near future the most important step is the 1.0 release, of course, where we still have some missing features in OpenSync as well as in the plugins.
One thing I would really like to see is a thunderbird plugin for OpenSync. I use thunderbird personally and would really like to keep my contacts up to date with my cellular, but I was not yet able to find the time to implement it.

Tobias:

One thing that would really rock in future versions of OpenSync is an automatic hardware detection mechanism, so when you plugin your Palm or switch on your bluetooth device, OpenSync will create a synchronization group automatically and ask the user to start syncing. To bring OpenSync to the level of _The Syncing Solution [tm]_ we must reduce the necessary configuration to a minimum.

What was the most dire problem you had to face when creating OpenSync and how did you face it?

Cornelius:

Fortunately the problems which I personally would consider to be dire are solved by the implementation of OpenSync which is well hidden from the outside world and [they are] an area I didn’t work on 😉

Armin:

I guess that I am the right person to answer this question then 🙂
The most complicated part of OpenSync is definitely the format conversion, which is responsible for converting the format of one device to the format that another device understands.
There are a lot of subsystems in this format conversion that make it so complex, like conversion path searching, comparing items, detection of mime types and last but not least the conversion itself. So this was a hard piece of work.

What was the greatest moment for you?

Cornelius:

I think the greatest moment was when, after three days of concentrated hacking, we had a first working version of the KDE frontend for OpenSync. This was at meeting at the SUSE offices in Nuernberg and we were able to successfully do a small presentation and demo to a group of interested SUSE people.

Armin:

I don’t remember a distinct “greatest moment”. But what is a really great feeling is to see that a project catches on, that other people get involved, use the code you have written and improve it in ways that you haven’t thought of initially.

Tobias:

Hmm, also hacking on OpenSync/KitcheSync is much fun in general, the greatest moment was when the new KitchenSync frontend synced two directories via OpenSync the first time. But it was also cool when we managed to get the IrMC plugin working again after porting it to OpenSync.

As we now know the worst problem you faced and your greatest moment, the only one missing is: What was your weirdest experience while working on OpenSync?

Cornelius:

Not directly related to OpenSync, but pretty weird was meeting a co-worker at the Amsterdam airport when returning from the last OpenSync meeting. I don’t know how high the chance is to meet somebody you know on a big random airport not related at all to the places where you or the other person live, but it was quite surprising.

Tobias:

Since my favorite language is C++, I was always confused how people can use plain C for such a project, half the time your are busy with writing code for allocating/freeing memory areas. Nevertheless Armin did a great job and he is always a help for solving strange C problems 🙂

Now I’d like to move on to some more specific questions about current and planned abilities of OpenSync. As first, I’ve got a personal one:

I have an old iPod sitting around here. Can I or will I be able to use a program utilizing OpenSync to synchronize my calendars, contacts and music to it?

Cornelius:

I’m not aware of any iPod support for OpenSync up to now, but if it doesn’t exist yet, why not write it? OpenSync makes this easy. This is a chance for everybody with the personal desire to sync one device or another to get involved.

Armin:

I dont think that there is iPod support yet for OpenSync. But it would definitely be possible to use OpenSync for this task. So if someone would like to implement an iPod plugin, I would be glad to help 🙂

Which other devices do you already support?

Cornelius:

At this time, OpenSync supports Palms, SyncML and IrMC capable devices.

Which programs already implement OpenSync and where can we check back to find new additions?

Cornelius:

On the application side there is support for Evolution [GNOME] and Kontact with KitchenSync [KDE] on the frontend side and the backend side and some more. I expect that further applications will adopt OpenSync once the 1.0 version is released.

Armin:

Besides kitchensync there already are a command line tool and a port of the multisync GUI. Aside from the GUIs, I would really like to see OpenSync being used in other applications as well. One possibility for example would to be integrate OpenSync into Evolution to give users the possibility to synchronize their devices directly from this application. News can generally be found on the OpenSync web site www.opensync.org.

It is time to give the developers something to devour, too. I’ll keep this as a short twice-fold technical dive before coming to the takeoff question, even though I’m sure there’s information for a double-volume book on technical subleties.

As first dive: How did you integrate OpenSync in KitchenSync, viewed from the coding side?

Cornelius:

OpenSync provides a C interface. We wrapped this with a small C++ library and put KitchenSync on top. Due to the object oriented nature of the OpenSync interfaces this was quite easy.
Recently I also started to write a D-Bus frontend for OpenSync. This also is a nice way to integrate OpenSync which provides a wide variety of options regarding programming languages and system configurations.

And for the second, deeper dive:

Can you give us a quick outline of those inner workings of OpenSync, from the developers view, which make OpenSync especially viable for application in several different desktop environments?

Cornelius:

That’s really a question for Armin. For those who are interested I would recommend to have a look at the OpenSync website. There is a nice white paper about the internal structure and functionality of OpenSync.

Armin:

OpenSync consists of several parts:
First there is the plugin API which defines what functions a plugin has to implement so that OpenSync can dlopen() it. There are 2 types of plugins:
A sync plugin which can synchronize a certain device or application and which provides functions for the initialization, handling the connection to a device and reading and writing items. Then there is a format plugin which defines a format and how to convert, compare and detect it.
The next part is a set of helper functions which are provided to ease to programming of synchronization plugins. These helper functions include things like handling plugin config files, HashTables which can be used to detect changes in sets of items, functions to detect when a resync of devices is necessary etc.
The syncing logic itself resides in the sync engine, which is a separate part. The sync engine is responsible for deciding when to call the connect function of a plugin, when to read or write from it. The engine also takes care of invoking the format conversion functions so that each plugin gets the items in its required format.
If you want more information and details about the inner workings of OpenSync, you should really visit the opensync.org website or ask its developers.

To add some more spice for those of our readers, whose interest you just managed to spawn (or to skyrocket), please tell us where they can get more information on the OpenSync Framework, how they can best meet and help you and how they can help improving sync-support for KDE by helping OpenSync.

Cornelius:

Again, the OpenSync web site is the right source for information. Regarding the KDE side, the kde-pim@kde.org mailing list is probably the right address. At the moment the most important help would be everything which gets the OpenSync 1.0 release done.
[And even though] I already said it, it can’t be repeated too often: OpenSync will be the one unified syncing solution for the free desktop. Cross-device, cross-platform, cross-desktop.
It’s the first time I feel well when thinking about syncing 😉.

Armin:

Regarding OpenSync, the best places to ask would be the opensync mailing lists at sourceforge or the #opensync irc channel on the freenode.net servers.
There are always a lot of things where we could need a helping hand and where we would be really glad to get some help. So everyone who is interested in OpenSync is welcome to join.

Many thanks for your time!

Cornelius:

Thanks for doing the interview. It’s always fun to talk about OpenSync, because it’s really the right thing.

Armin:

Thank you for taking your time and doing this interview. I really appreciate your help!

Tobias:

Thanks for your work. Publication and marketing is something that is really missing in the open source community. We have nice software but nobody knows 😉

Further Information on OpenSync can be found on the OpenSync Website: www.opensync.org


This Interview was done by Arne Babenhauserheide in April 2006 via e-mail and KOffice on behalf of himself, the OpenSource Community, SpreadKDE.org and the Dot (dot.kde.org).It was first published on the Dot and is licensed under the cc-attribution-sharealike-license.A pdf-version with pictures can be found at opensync-interview.pdf (OpenDocument version: opensync-interview.odt)

This article features first-hand journalism by Wikinews members. See the collaboration page for more details.
This article features first-hand journalism by Wikinews members. See the collaboration page for more details.

Retrieved from “https://en.wikinews.org/w/index.php?title=OpenSync_Interview_-_syncing_on_the_free_desktop&oldid=2290386”
Uncategorized June 20th 2021

20 dead in Hyderabad, India flyover collapse

">
20 dead in Hyderabad, India flyover collapse
No Comments »

Sunday, September 9, 2007

At least 20 people have died and 20 more are injured after a partially constructed flyover (overpass) in Hyderabad, India collapsed onto traffic.

The disaster occurred at the Panjagutta junction, near Nagarjuna Circle. Two large concrete sections dropped onto oncoming cars and motorised rickshaws, damaging several severely.

A large emergency effort was immediately activated, but experienced severe difficulties in reaching the site due to congested traffic resulting from the collapse. Ambulances from the 108 EMRI Service and Appollo Hospitals attended the scene, and rushed the injured to a variety of nearby hospitals. All the region’s major hospitals, particularly the nearby Nizam Institute of Medical Sciences, have placed their medical staff on emergency alert. Rescuers are now using cranes and cutting equipment in an effort to reach anyone who may still be trapped. It is expected that the death toll could rise further as many vehicles remain trapped under tons of debris.

Various politicians also attended the scene, including the local district collector, Chief Minister of Andhra Pradesh Dr. YS Rajasekhara Reddy, Senior Congress Leader and MLA from Khairathabad P Janardhan Reddy and several other ministers.

Police have asked both the public and the press to keep away from the area, in order to prevent further collapse of the unstable structure. Preliminary investigations suggest the flyover had been been poorly constructed. The construction project had been carried out by leading contractor Gammon India Limited. It had been delayed, the original foundations having been built in 2005. After a successful request by the company to have the deadline for the project extended, work was slated to cease in November of this year, with the flyover entering operation by December. It is believed heavy rains in the area a few hours prior to the collapse may have contributed to the disaster.

Retrieved from “https://en.wikinews.org/w/index.php?title=20_dead_in_Hyderabad,_India_flyover_collapse&oldid=4329101”
Uncategorized June 20th 2021

What Can A Forex Trading Robot Do For You?

No Comments »

What Can A Forex Trading Robot Do For You?

by

Deane Alban

Whether you are eager to get started trading in the Forex market, or you already have some Forex experience and want your trading to become even more profitable, then you should consider getting an automated trading system. The best Forex trading robots will help you make money automatically, around the clock, without your daily input. It seems so easy, you may not believe it is possible until you experience it firsthand. A good automatic Forex trading system will also give you the option of providing you with valuable information but allow you to take control when you want it.

[youtube]http://www.youtube.com/watch?v=R4XOe38VRt8[/youtube]

These Forex trading robots will really help you out when making tough decisions about buying and selling. You could go through brokerage firms for your trading needs, but wouldn’t your rather do it yourself with the help of your Forex robot and have the control? A Forex brokerage firm can also be a hassle, since you have to go through the firm for every trade you make. Why do that when you can do all the trading yourself with any one of the auto Forex trading systems on the market? You still need to use a Forex broker but there are many that are happy to work with your Forex robot. When you buy a Forex trading robot, you will often get recommendations of a robot-friendly broker that system recommends. So how does this all work and how can the best Forex trading robots help you? The answer is that an automated trading system can help you on several different levels, depending on how you set it up and use it. If you are a beginner, you can simply let the automated trading system do all the work for you. However, if you are a newbie to Forex I recommend you at least learn the basics of Forex trading which most trading systems will supply. You can use your trading robot to teach you along the way. Consider it an automated mentor. If you are a person who wants to make every single decision then that’s OK too! The best Forex trading robots do not have to be in control. These robots can simply offer you good advice and information and let you do what you will with it. There are hundreds of different systems, all with their own features that make them a little different from the rest. FAP Turbo is the most popular totally automated Forex robot another is Forex Megadroid. These are just two of many different systems to choose from, so take a look at a few and see which of the forex trading robots on the market would be best for you. A good Forex trading robot should teach you what you need to know about Forex and should start making you money round the clock as soon as you have it downloaded and running. But don’t be disappointed if you don’t get results as good as they claim on the website. Always read their earnings disclaimer which should be provided on the website, too. Now get started and good luck with your foray into Forex trading.

Frustrated searching for a

Forex robot

that works? At AutoForex101.com, we give you tell-it-like-it-is reports – just the facts and our analysis – on Forex trading robots that can really help. Find the right automated Forex trading softwareand get some great tips too. Check out

AutoForex101.com

.

Article Source:

ArticleRich.com

Forex Broker June 20th 2021